Features product:

• 3-in-1 device: combination of a digital oscilloscope with an LCR tester and a DDS generator
• 2.4" LCD TFT display - easy control of the device and convenient reading of measurement results
• Powered by a 1500 mAh battery
• Charging via USB-C
• Widely used in working with electronics

Digital oscilloscope:

• Measurement of an analog signal with a bandwidth of up to 500 kHz
• Has one channel
• Allows you to detect signal changes in real time, at a sampling rate of 10 MS/s
• Allows you to measure the frequency, period and duty cycle of a signal
• Precise signal measurement thanks to 3 trigger modes: auto, normal or single measurement

Tester LCR:

• Allows you to measure the capacitance, resistance and inductance of electronic components
• Has a signal generator, including sine, square, triangle, pulse and DC

Specification - Digital oscilloscope:

• Number of channels: 1
• Analog bandwidth: 0 to 500kHz
• Input resistance: 1MΩ
• Coupling mode: AC/DC
• Real-time sampling rate: 10 MS/s
• Test voltage range: 1X : 40V / 10X : 400V
• Vertical sensitivity: 10mV/Div to 10V/Div
• Vertical offset: adjustable
• Horizontal time base range: 10us/Div to 500s/Div
• Trigger mode: auto, normal, single measurement
• Trigger type: rising edge, falling edge
• Trigger level: adjustable
• Stop measurement: HOLD function
• Measurement of parameters: frequency, period, duty cycle
• Dimensions: 79 x 103 x 31 (mm)

Specification - LCR Tester:

• Transistor tester: JFET, IGBT, MOSFET
• Diode test: <4.5V
• Measurement of ESR of capacitors
• Capacitance: 25pF to 100mF
• Resistance: 0.01Ω to 50MΩ
• Inductance: 10uH to 1000uH
• Battery: 0.1 to 4.5V
• Input voltage: 0 to 40 V
• PWM output:1.5 kHz to 9.99 MHz

Specification - Signal generator:

• Signal: sine wave: 1-100 kHz, 3.3V/50%
• Signal: square wave: 1-100 kHz, 3.3V/50%
• Signal: Pulse: 1-100 kHz, 3.3V/50%
• Signal: triangular: 1-100 kHz, 3.3V/50%
• Signal: ramp type: 1-100 kHz, 3.3V/50%
• Signal: DC: 0 - 3.3V

Specification remaining:

• Display: Color, 2.4" LCD TFT
• Power supply: 1500 mAh battery
• Charging: USB Type C, 5V
• Dimensions: 79 x 31 x 103 mm

Content set:

• 1x 3in1 oscilloscope measuring device FNIRSI DSO-TC3
• 1x Height probe its voltage P6100
• 1x Probe with alligator clips
• 3x Test tip with hook
• 1x Adapter
• 1x USB-C power cable